Stone maintenance concept in the consumer group has been generally, different kinds of stone have different conservation matters needing attention. If you do not pay attention to some details in the process of stone conservation, the effect will be counterproductive, not only can not be protected by the protection of stone will be damaged. This article will introduce the natural stone ground maintenance of attention.
First, dust is dust push (also known as "dry mop") of various high-grade ground such as marble ground dust removal, simple operation labor-saving, attached to the dust and strong, can keep the floor is bright, is widely used in the area of responsibility of the daily cleaning.
Two, use the push dust preparation and the inspection work is what?
(1) before using the static dedusting agent into the mop. (the electrostatic precipitator is evenly sprayed on the dust, sealed 4 hours after the dry use. )
(2) check the dust push fiber is clean; (3) check the static dedusting agent into the case;
(4) check the dust push rod clamping head position and direction is correct;
Three, use dust when what is the basic essentials of operation?
(1) along the line to push the dust off one side, dust can not push off the ground, can not be dragged back and forth. (depending on the distance between the dust and the dust custom)
(2) push dust, dust cover to push each line overlap 1/4, to prevent push.
(3) pushing dust covered with dust, the dust massage to work with a vacuum cleaner to use, until the ground completely clean so far.
(4) dust sticky lose ability to use static dedusting agent treatment, and then use.
(5) on the ground such as water, dirt and pollution to timely with correct methods for cleaning clean (so as to avoid the occurrence of pigment pollution and disease) and push the dust
Four, pushing the dust hold:
(1) hand dust implementation should pay attention to the end of time, dust cover up the dirty side outwards.
(2) when walking, attention can not touch the frame or dust push ceiling lighting lamps.
(3) at the door, stairs can not touch others attention.
Five, how to determine the dust should be cleaned?
(1) the dust to push fiber is dirty, repeatedly spraying electrostatic precipitator agent after no adsorption, push the dust footsteps cover dust under the ground is still missing.
(2) is soaked in water.
Six, how to clean the dust cover?
(1) push the dust cover with a dirty, use alkaline water wash, namely soaked in detergent solution. At the same time, the best use about 40 DEG C hot water immersion after cleaning.
(2) pushing dust mask after washing the best use of washing machine and drying, the fiber doukai after drying.
(3) after drying to spray on the use of static dedusting agent. Dust electrostatic precipitator, it is best to cooperate with the brush, the dust to push the cover of the fiber to straighten out the dust to push electrostatic precipitator uniform penetration.
Daily maintenance notice
1, not to be exposed to non neutral items
2, can not arbitrarily waxing
3, can not be used indiscriminately non neutral cleaning agent
4, not long covered with carpet, sundries
5, must be kept clean
6, to the immediate removal of pollution
7, keep ventilation drying
8, to regularly done protective treatment
To keep the stone life, stop water pollution source and the penetration, be sure to regularly (depending on the type of stone and protective agent quality is best 1-3 years do 1-2 times treatment) facilities for the door handle. Special attention must be paid to the quality of the protective agent. After construction, it should be able to maintain the permeability of stone and waterproof, anti fouling property. Do not use the unidentified protective agent, so not only can not achieve the protective effect, but increased the difficulty of maintenance of stone.
SICONG Official WeChat Subscription
