What are the ways to protect the construction of stone

   Stone protection construction methods are: brush, paint, brush, spray, immersion, roll and pour seven.

Stone because of some characteristics of its own, we need careful protection. Stone door construction methods: Brush (brush), Tu (sponge), clean (with a cloth), spray with low pressure spray gun, soaking in soaking tank, rolling coating (drum), drench (container) seven. Construction, it is necessary to according to the stone veneer and the types of protective agent to determine the protection of construction methods.

(1) spraying: characteristics of this method of construction is fast construction speed, uniform coating, especially suitable for mushroom stone surface construction. But spoil the big, high cost.

(2) of immersion: the measures for the construction of the main advantages of is can make the exterior and interior of the stone can get plenty of door, not like the other way as presented saturated with no defects. In all construction methods, as long as the immersion can reach the best protective effect. But because the stone is too large for the protective agent, so the cost is higher. Therefore, the demand for the use of some of the best quality and low price of the maintenance agent.

(3) roll this way, suitable for large area ground protection construction, for the wall loss is too big. Usually used in the construction of low cost maintenance agent.

(4) of the cloth to wipe, the construction technology for light stone appearance, we usually do not initiate the measures for the construction of, but if cloth painting construction dose can meet the door stone, it is still a good construction methods.

(5) sponge coating, this technology for stone a light appearance, can be more evenly coated with protective agent.

(6) pour, this technology is suitable for all kinds of stone appearance, but the high demand for equipment and places.

(7) of the hair brush, this technique applicable to all appearance, can freely manipulate dose, is commonly used a good construction method.

       Above the construction measures, in addition to the (2), six other construction technology with the defects is: get door not deep within the stone is very useful. Therefore, we have to promote the construction of this construction technology (for stone factory), this construction technology can compensate for the lack of some protective agent.

      Stone door is not the same agent has different requirements of construction, pre construction should be on the basis of the use of protective agent is adopted to illustrate and field actual situation proposed the feasible construction plan. In addition, the role of stone protection is good or bad, and the quality of the protective agent, construction technology and the nature of the construction personnel have a lot of contact. Therefore, the protection of the construction of the best professional stone maintenance company or by them to carry out the disposal, so that the quality of protection can be guaranteed.